EMX-FC-1710 F3 Femto Flight Controller

Product Code: EMX-FC-1710

Availability:Out of stock

User Mannual as follows,



3D printable Femto FC holder.



Please note that Babyhawk Femto has a rear facing USB port, where as the standard Femto has the USB port is has a USB facing the side of the board orientation. 



l STM32F303 CPU

l MPU9250 accelerometer/gyro/compass (connected via SPI)

l 2-6S LiPo battery

l Integrated 5V/3A BEC

l Dedicated Sbus and serial RX with 5v ,Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX with built-in inverter

l 6Supports direct connection of 3.3v Spektrum Satellite receivers

l Telemetry support (frsky telemetry, smartport, and HoTT telemetry)

l Dedicated PPM receiver input

l Buzzer support

l Dedicated output for programmable LEDs - great for orientation, racing and night flying. (Currently mutually exclusive with the Transponder)

l BLHeli Passthrough readyconnect BLheli suite

l 2.0 mm pin headers

l 80A Current tolerance (PDB)

l Integrated Battery monitoring

l Use all the features all the time; e.g. Connect your USB + SmartPort + SBus + LED Strip + Battery Monitoring + 4 motors - all at the same time!

l 20x20mm board

l Weight 2.2 grams


Use for Spektrum Satellite RX, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX, etc.

※UART2/PPM - Serial RX or PPM RX + Telemetry

Use RX2 as PPM receiver. Use TX2 as telemetry output when using PPM.