EMAX Micro Brushless Power System Combo 1

(4 reviews) Write a Review


1- EMAX Femto F3 Flight Controller+PDB Board
4 - EMAX Bullet 6A BLHeli_S ESC (1S-2S Support) 
4 - EMAX RS1104 5250kv Brushless Motors 
2 - EMAX T2345BN Complete Propeller Sets
24 - Screws





EMAX Femto F3 Flight Controller+PDB Board





Size: 20mm x 20mm
Weight: 2.2g
Input Voltage: Direct 2S-6S LiPo (7.4v - 25.2v)
Integrated PDB with 5V/3A BEC
Current Tolerance: 80A Continuous
CPU: STM32F303
Gyro: MPU9250 Accelerometer/gyro/compass connected via SPI
Dedicated Sbus and Serial RX with 5v
Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX with built-in inverter
Direct connection of 3.3v Spektrum Satellite Receivers
Telemetry Support (FrSky, Smartport, and HoTT Telemetry)
Supports Buzzer
Supports RGB LED
BLHeli Passthrough ready
2.0mm Pin Headers for direct plug-in 
Femto F3 Manual: http://www.yinyanmodel.com/upload/20...1094147991.pdf



EMAX RS1104 5250kv Brushless Motors



Stator Diameter: 11mm
Stator Height: 4mm
KV: 5250
Weight: 5.6g each
Input Voltage: 1S-4S (3.7v-16.8v)
Max Thrust = 116g - 120g using 2S LiPo and EMAX T2345 propeller



 EMAX Bullet 6A BLHeli_S ESC


Size: 9.4mm x 21.5mm
Weight: 2.1g each
Input Voltage: 1S-2S (3.7v-8.4v)
Firmware: BLHeli_S 16.4 (Programmable)
Supported Protocols: Analog Signals - MULTISHOT, ONESHOT42, ONESHOT125 / Digital Signals - DSHOT150, 300, 600
Imported Japanese Toshiba MOSFETs and Japanese Murata Ceramic Capacitors
3oz High-TG PCB board: Reduces Heat Soak and improves system efficiency
Silicone Signal and Power Wires provides high heat-resistance and flexibility
Ultra-Small / Ultra-Light footprint
Aluminum Heatsink reduces core temperature and protects against prop stikes
Bullet ESC Information: https://www.emaxmodel.com/bullet-series-6a-esc.html


EMAX T2345BN Complete Propeller Sets 

Propeller diameter: 2.3" 
Number of Blades: 3 (Tri-Blade)
Style of Blades: Blunt-Nose
Comes with 2 complete sets (4CW + 4 CCW propellers)

8 - M2x7mm Screws
16 - M1.4x3mm Screws
16 - M1.4x4mm Screws

**EMAX 1104 Micro Brushless Power System Combo is recommended for quadcopter builds from 70mm-95mm motor-to-motor distance.**



4 Reviews Hide Reviews Show Reviews

  • 5
    Great Value

    Posted by Andrew on May 23rd 2018

    This is a great combo for the value. Used this with a Flitetest Gremlin frame, and it makes for a really fun, capable 2s quad.

  • 5
    Exceeded my expectations

    Posted by Andrew Gurk on Jun 30th 2017

    I purchased this for a frame that was designed for this micro power pack. In my mind it didn't seem like it was going to be too powerful and was going to just be a fun cruise around rig. Man was I wrong, these package has some punch behind them, it is actually a very quick pack and is smooth and works great together. I'm impressed beyond belief on how well this kit works. And another big plus is the great price.

  • 5
    great setup

    Posted by Unknown on Jun 23rd 2017

    This is a great setup to be able to abuse, and is easy to set up.

  • 5
    fun project. flys fast.

    Posted by cmojena1990@gmail.com on May 31st 2017

    Was so excited to get my flight controller. Got every thing ready and heated up the soldering iron. Was a little tricky I'm still learning how to solder. Wiring was simple I threw it on a carbon fiber frame. But the flight board died shortly after plugging in the battery. All my solder connections looked ok but who knows. Got another one and boom was flying in no time. Really responsive I'm using ibus with a micro flysky reciever. I may turn down the rates a bit but man does this thing rip.