EMAX LS2206 Lite Spec Brushless Motor (CW Thread)

$17.99
(1 review) Write a Review
SKU:
EMX-LS2206

Description:


Introducing the new LS (Lite Spec) 2206 & 2207 line of motors. After countless amounts of research, EMAX set out to make a motor line that meets the demands of each pilot. From racing and freestyle, EMAX managed to combine such demands into a motor that can cover all fronts by reducing the weight while keeping the durability and performance in check.

Finding the balance of power and efficiency to keep you flying for longer, the LS series will give you the power you need. There is no single KV and motor size to meet the demands of every pilot, therefore this series offers two different sizes in 2206 & 2207 with a large KV range to meet your needs as a pilot.

Key Features:

  • NSK high efficiency bearings  
  • 0.15mm silicon steel laminations
  • Aluminum shaft with hardened steel core
  • 1.8mm N48SH ARC Magnets
  • Screw capture for bell. Easy to service
  • Stealth black anodized color, with silver beveled edges
  • Reduced base size. Lower the weight and easier to make sure not to short your wires with long screws.
  • 16mm x 16mm mounting holes ( 19x16 is the past) future frames don’t need to have slotted mounting holes.
  • 120mm 18AWG wire. Testing has shown a 5% increase in performance with thicker gauged wire. Compared from 20AWG wire.
  • New bell design with upper and lower beam support to reduce damage from collapse of impacts. 
  • Bearing size: 3*8*4mm


Included in the Box:
• 1x motor
• 5x 3mm arm mounting screws
• 5x 4mm arm mounting screws
• 1x replacement bell housing screw
• 1x replacement bell housing washer
• 1x EMAX Stickers

ls-infographic-01.jpgls-infographic-02.jpgls-infographic-03.jpgls-infographic-04.jpgls-infographic-05.jpgls-infographic-06.jpgls-infographic-07.jpg

 

 

Videos Hide Videos Show Videos

1 Review Hide Reviews Show Reviews

  • 5
    The bearings are good

    Posted by Unknown on Apr 21st 2018

    I have the 2206 2550kv motor on my freestyle rig. They are great when you need the top end power to throw your rig over obstacles. The torque is very good and responsive when getting of sticky situations. I have crash it plenty of times on concrete and into trees and the motor still works fine. I use cyclone 5051 props on them and my flight time increased 30 seconds but when I'm on cruise mode it had increased a minute and 20 seconds.