Loading... Please wait...

EMX-FC-1710 F3 Femto Flight Controller


Product Description

User Mannual as follows,



3D printable Femto FC holder.



Please note that Babyhawk Femto has a rear facing USB port, where as the standard Femto has the USB port is has a USB facing the side of the board orientation. 



l STM32F303 CPU

l MPU9250 accelerometer/gyro/compass (connected via SPI)

l 2-6S LiPo battery

l Integrated 5V/3A BEC

l Dedicated Sbus and serial RX with 5v ,Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX with built-in inverter

l 6Supports direct connection of 3.3v Spektrum Satellite receivers

l Telemetry support (frsky telemetry, smartport, and HoTT telemetry)

l Dedicated PPM receiver input

l Buzzer support

l Dedicated output for programmable LEDs - great for orientation, racing and night flying. (Currently mutually exclusive with the Transponder)

l BLHeli Passthrough readyconnect BLheli suite

l 2.0 mm pin headers

l 80A Current tolerance (PDB)

l Integrated Battery monitoring

l Use all the features all the time; e.g. Connect your USB + SmartPort + SBus + LED Strip + Battery Monitoring + 4 motors - all at the same time!

l 20x20mm board

l Weight 2.2 grams


Use for Spektrum Satellite RX, Spektrum 1024/2048, SBUS, XBUS, SumD and SumH RX, etc.

※UART2/PPM - Serial RX or PPM RX + Telemetry

Use RX2 as PPM receiver. Use TX2 as telemetry output when using PPM.

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Recent Updates


Connect with us Facebook Instagram Twitter

Click the button below to add the EMX-FC-1710 F3 Femto Flight Controller to your wish list.